Moomba Outback LSV Specifications Page 38

  • Download
  • Add to my manuals
  • Print
  • Page
    / 84
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 37
38
© 2006 Skier’s Choice, Inc.
Gravity Ballast System
The optional Gravity Ballast System is an electronically
controlled ballast system that can be operated from the
driver’s seat. The Gravity system is available in a 1 or 3
position system. The switch panel to the 3 position system
is located directly below the shifter mechanism, and the 1
position system is operated from a switch on the dash.
Each switch allows independent filling and draining of each
ballast container by simply hitting the fill or drain switch. If
the system fails to fill or drain, you may check the
resettable breaker on the switch panel, or the separate
ballast fuse block located under the dash area. The ballast
bags or tanks can be found in the front ski locker, under
the rear seat, or in the rear v-drive storage areas depending
on the the model and ballast system.
Care should be taken that the ballast bags are situated
properly with the fill hose on top and drain hose on bottom
and that all fittings are installed securely. The bags should
not be twisted and the bags should be free to expand and
drain completely. Care should be taken to prevent sharp
objects from coming in contact with the bags. Cuts and
punctures to the bags are not warrantable.
Warning Light (V-Drives Only)
The warning light should be “on” at idle. If the light remains
“on” when the engine is above 1200 RPM, shut the engine
off and check V-Drive oil level.
Your Moomba is equipped with a Safety Lanyard/Engine
Shut-Off switch. In order for the engine to run, the plastic
tip of the safety lanyard must be attached to the switch. If
the clip is removed from the switch, the engine will not
run.
Avoid serious injury or death. Attach Safety Lanyard
to driver prior to operating the boat.
Safety Lanyard/Engine Shut-Off Switch
Page view 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 83 84

Comments to this Manuals

No comments